[. . . ] It is recommended that a separate circuit serving only this appliance be provided. [. . . ] Drain System Options Standpipe drain system - wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2. 4 m) from the bottom of the washer. 321/2" (820 mm) OVERALL DIMENSIONS Washer dimensions 52 /2" (1335 mm) 1 Custom undercounter installation-washer only 27" (686 mm) 39" min. (990 mm) 381/4" (970 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required. See "Tools and Parts. " The siphon break must be a minimum of 28" (711 mm) from the bottom of the washer. Additional hoses might be needed. 1" (25 mm) 27" (686 mm) 1" (25 mm) 18" min (457 mm) 1" (25 mm) 5½"** (140 mm) 1" (25 mm) 27" (686 mm) 1" (25 mm) 4" 31½" 1" (25 mm) (800 mm) (102 mm) * required spacing For cabinet installation, with a door, the minimum ventilation openings in the top are required. 30" min. (710 (711mm) 7" (178 mm) D 7" (178 mm) C 9" (229 mm) 1" 27" 311/2" (25 mm) 4" 1" (102 mm) (800 mm) (25 mm) (686 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ] (710 (711mm) 7" (178 mm) D 7" (178 mm) C 9" (229 mm) 1" 27" 311/2" (25 mm) 4" 1" (102 mm) (800 mm) (25 mm) (686 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ]